Government Decree No. 288 / 2000 Coll.
Government Regulation amending Government Regulation No. 14 / 1999 Coll., laying down technical requirements for lifts, as amended by Government Regulation No. 227 / 1999 Coll.
Valid
Regulation
Effective from 02.07.2001
Text versions:
02.07.2001
29.08.2000
Zobrazeno prvních 200 z celkem 234 ustanovení tohoto předpisu.
Zobrazit celý předpis →
Pro stažení celého znění použijte tlačítko Stáhnout výše.
288
GOVERNMENT REGULATION
of 3 July 2000
amending Government Regulation No 14 / 1999 Coll., laying down technical requirements for lifts, as amended by Government Regulation No 227 / 1999 Coll.
The Government orders pursuant to Section 22 of Act No. 22 / 1997 Coll., on Technical Requirements for Products and on the Amendment and Addition of Certain Acts, as amended by Act No. 71 / 2000 Coll., ("the Act ') to implement Sections 11, 12 and 13 of the Act:
Government Regulation No. 14 / 1999 Coll., laying down technical requirements for lifts, as amended by Government Decree No. 227 / 1999 Coll., is amended as follows:
1. in Article 1, the following paragraph 1 is inserted:
"(1) This Regulation lays down technical requirements for lifts, in accordance with the law of the European Communities (1) and the international Treaty (2).
1) Directive 95 / 16 / EC of the European Parliament and of the Council of 29 June 1995 on the approximation of the laws of the Member States relating to lifts.
2) Protocol to the Europe Agreement on Conformity Assessment and Acceptance of Industrial Products. '.
Paragraphs 1 and 2 shall become paragraphs 2 and 3.
2. in Paragraph 1 (2) (b), "2" is replaced by "4."
3. In Section 1, the following paragraph 4 is added:
"(4) For the purposes of this Regulation, the manufacturer or importers of the lift shall be considered to be the supplier. (3)
3) Article 2 of Act No. 22 / 1997 Coll., on Technical Requirements for Products and on the Amendment and Addition of Certain Acts, as amended by Act No. 71 / 2000 Coll. '
5. In Article 2 (2), the words "lifts and safety components' are replaced by the words" lifts and safety components' and the following sentence is added at the end of the paragraph: "Where a risk related to lifts is mentioned in whole or in part in another government regulation, this other government regulation must also be used to address such risks. '
6. Paragraph 2 (3) reads as follows:
"(3) Where a harmonised Czech technical standard or, in the case of lifts and safety components of origin in the Czech Republic or in the Member States of the European Community, a foreign technical standard transposing a harmonised European standard in the Member States of the European Union (Section 4a (3) of the Act) also covers one of the essential requirements, it is considered that:
(a) lifts complying with this technical standard comply with the relevant essential requirements;
(b) the safety components which comply with this technical standard allow the lift in which they are fitted according to the manufacturer's installation instructions to be considered as a lift which meets the relevant essential requirements. ";
7. In Article 2, paragraphs 4, 5 and 6 are added:
"(4) The person responsible for the implementation of the buildings and the supplier of the lift shall inform each other in such a way as to ensure the proper operation and safe use of the lift.
(5) No piping, electrical installation or equipment not required for the operation and safety of the lift shall be placed in the ducts intended for lifts.
(6) The exhibition of lifts or safety components at fairs and exhibitions or the demonstration of lifts which do not comply with the requirements of this Regulation shall not be considered as marketing; (3) if they are marked with an indication that they do not meet the essential requirements, that they are not intended for sale, and if appropriate measures have been taken to guarantee the protection of persons. ';
8. in Article 3 (1) (a), the figure "3" is replaced by "5," the words "safety components by random checks" are replaced by the words "safety components with random checks" and the figure "8" is replaced by "11."
9. in Article 3 (1) (b), "3" is replaced by "5" and "5" is replaced by "8."
10. in Paragraph 3 (1) (c), "6" is replaced by "9."
11. in Article 3, paragraph 3, including footnote 1, is deleted;
12. in Article 4 (1), "producer or importer" is replaced by "supplier."
13. in Article 4 (1) (a), "3" is replaced by "5."
14. in Article 4 (1) (a) (1), the words "by verifying the conformity of an elevator with a certified type" shall be replaced by "final inspection" and the words "4" shall be replaced by "6."
15. in Paragraph 4 (1) (a) (2), "9" is replaced by "12."
16. in Paragraph 4 (1) (a) (3), "11" is replaced by "14."
17. in Paragraph 4 (1) (b), "3" is replaced by "5."
18. in Paragraph 4 (1) (b) (1), the words "verification of the conformity of an elevator with a certified type" shall be replaced by "final inspection" and "4" shall be replaced by "6."
19. in Paragraph 4 (1) (b) (2), "9" is replaced by "12."
20. in Paragraph 4 (1) (b) (3), "11" is replaced by "14."
21. in Paragraph 4 (1) (b), "technical requirements" is replaced by "essential requirements."
22. in Paragraph 4 (1) (c), "10" is replaced by "13."
23. in Paragraph 4 (1) (c) (1), the words "verification of the conformity of an elevator with a certified type" shall be replaced by "final inspection" and "4" shall be replaced by "6."
24. in Paragraph 4 (1) (c) (2), "9" is replaced by "12."
25. in Paragraph 4 (1) (c) (3), "11" is replaced by "14."
26. in Paragraph 4 (1) (d), "7" is replaced by "10."
27. in Paragraph 4 (1) (e), "10" is replaced by "13."
28. In Paragraph 4 (2), "producer or importer 'is replaced by" supplier'.
30. In Article 4, the following paragraph 4 is added:
"(4) Suppliers of lifts of origin in the Czech Republic and the European Community shall, upon request, provide copies of certificates or other documents, including related documents, to the Office and to authorised persons. '
31. in Article 5, the current text shall be renumbered as paragraph 1, the words "paragraph 4" shall be replaced by the words "paragraph 8"; the words "whether the design or other documents have been processed by a person other than the supplier" shall be inserted after the words "this Regulation" and the following paragraph 2 shall be added:
"(2) In cases resulting from Paragraph 13 (8) of the Act, the importer shall submit to the supervisory authority documents in the official language of the country in which the product is originating or in the language agreed with the supervisory authority. '
32. in Article 6 (1) (d), the words "harmonised Czech technical standards" are replaced by the words "technical standards referred to in Article 2 (3)."
33.In Article 6 (2) (a), "manufacturers or importers" is replaced by "suppliers."
34. in Article 6 (2) (d), the words "harmonised Czech technical standards" are replaced by the words "technical standards referred to in Article 2 (3)" and in points (g) and (h), the words "manufacturer or importer" are replaced by the words "supplier."
35. in Article 6, the following paragraph 3 is added:
"(3) In the cases provided for in Annexes 6, 8 to 14 to this Regulation, the Czech mark of conformity shall be affixed to imported safety components or lifts not originating in the European Community. 4)
4) Government Decree No. 179 / 1997 Coll., laying down the graphic form of the Czech conformity mark, its implementation and location on the product. '
36. The following Section 6a is inserted after Section 6:
(1) The CE marking referred to in Annex 3 to this Regulation shall be affixed to safety components and lifts originating in the Czech Republic or in the Member States of the European Community and subsequently, without undue delay, to the EC declaration of conformity referred to in Annex 2 to this Regulation.
(2) The CE marking shall be affixed clearly and visibly in each lift cage and on the safety components listed in Annex 4 to this Regulation or, if this is not possible, on a label inextricably affixed to the safety component.
(3) The conditions for authorising the conformity assessment activities of lifts and safety components (Section 11 (2) of the Act) are set out in Annex 7 to this Regulation. "
37. In Annex No 1, point 1, the words "designated by the manufacturer or importer 'are replaced by the words" designated by the supplier of the lift or the manufacturer of the safety component' and the words "danger of the manufacturer or importer 'are replaced by the words" danger of the manufacturer of the safety component and the supplier of the lift'.
38. In Annex 1, point 2, the words "manufacturer or importer of lifts or safety components' are replaced by the words" manufacturer of safety components or supplier of lifts'.
39. In Annex No 1, the following sentence is added at the end of point 1.1: "Lifts shall also be subject to the essential requirements laid down in Government Regulation 178 / 1997 Coll., laying down technical requirements for construction products, as amended. '
40. In Annex 1, point 1.5.2, "Manufacturer or importer 'is replaced by" Supplier'.
41. In Annex 1, point 1.6.1, the words "unaccompanied disabled persons' are replaced by the words" persons with reduced mobility '.
42. In Annex 1, point 2.1, the words "Before the person 'are replaced by the words" Than the person entitled'.
43. In Annex 1, point 6.1, the words "or in a language agreed with the manufacturer or importer," shall be inserted after the words "in the Czech language."
44. The following Annexes 2 and 3 are inserted after Annex 1, including footnote 5:
"Annex No 2 to Government Decree No 14 / 1999 Coll.
EC CONFORMITY DECLARATION
1. CONTENTS OF THE EC DECLARATION OF CONFORMITY FOR SECURITY AUTHORITIES
The EC declaration of conformity ("the certificate of conformity ') shall contain the following particulars:
(a) identification of the manufacturer of the safety components;
(b) identification details of the authorised representative, if any;
(c) a description of the safety component, the type or series designation and, if any, the production number;
(d) safety function of the safety component, if not evident from the description,
(e) the year of manufacture of the safety component;
(f) all relevant provisions to which the safety component complies;
(g) references to the technical standards referred to in Article 2 (3), where applicable;
(h) identification of the authorised person if he has carried out an EC type-examination in accordance with Article 3 (1) (a) and (b);
(i) reference to the EC type-examination certificate, if issued;
(j) identification details of the authorised person, provided that he has carried out a production check pursuant to Article 3 (1) (b);
(k) identification of the authorised person, where it has assessed the quality assurance system provided by the manufacturer in accordance with Article 3 (1) (c);
(l) details of the signatory authorised to act on behalf of the manufacturer of the safety components or his authorised representative.
The declaration of conformity shall be typed or printed in the same language as the instructions for use referred to in Annex 1, paragraph 6.1.
2. CONTENTS OF THE CONFORMITY DECLARATION FOR IMPLEMENTED EXPENSES
The certificate of conformity shall contain the following particulars:
(a) identification of the supplier of the lift;
(b) the description of the lift, the type or series designation, the serial number and the address where the lift is fitted;
(c) the year of installation of the lift;
(d) all relevant provisions to which the lift complies;
(e) a reference to the technical standards referred to in Article 2 (3), if used;
(f) identification of the authorised person if he has carried out an EC examination of the type of model lift in accordance with § 4 (1) (a) and (b);
(g) reference to the EC type-examination certificate, if issued;
(h) identification details of the authorised person if he has carried out the verification of the conformity of the lift pursuant to Article 4 (1) (d);
(i) identification details of the authorised person if he has carried out a final inspection of the lift in accordance with § 4 (1) (a), (b), (c);
(j) identification of the authorised person, where it has assessed the quality assurance system provided by the supplier in accordance with Article 4 (1) (2) and (3) (a), (b), (c) and (e);
(k) details of the signatory authorised to act on behalf of the supplier of the lift.
The declaration of conformity shall be typed or printed in the same language as the instructions for use referred to in Annex 1, paragraph 6.2.
Příloha č. 3
Annex No. 3 to Government Decree No. 14 / 1999 Coll.
CE CONFORMITY MARKS
The graphical form of the CE marking is laid down in a separate legislation. 5)
The minimum size of 5 mm may not be respected for small safety components.
The CE conformity marking shall bear the identification number of the authorised person dealing with:
(a) the procedures referred to in Article 3 (1) (b) and (c);
(b) the procedures referred to in Article 4 (1).
5) Government Decree No 291 / 2000 Coll., laying down the graphic form of the CE marking. '
Annexes 2 to 4 to date shall be renumbered Annexes 4 to 6.
45. In newly marked Annex 4, point 5, the words "straight-line hydroengine 'are replaced by the words" hydraulic cylinder'.
46. In the newly marked Annex 5 to Part I, the word "REVIEW 'is replaced by" EC REVIEW'.
47. In newly marked Annex No 5 part in point 1, the words "type-examination 'are replaced by the words" EC type-examination';
48. In newly marked Annex No 5 part In the first sentence of point 4, the words "on type-examination 'are replaced by" on products originating in the Czech Republic or in the Member States of the European Community, on EC type-examination certificates, on other products, on type-examination certificates (hereinafter referred to as "type-examination certificate') 'and the words" manufacturers or importers' are replaced by the words "the applicant '.
49. In newly marked Annex No 5 part In the second and third sentences of point 4, the words "manufacturers or importers' are replaced by the words" manufacturers'.
50. In newly marked Annex No 5 part I, point 5, first sentence, "manufacturer or importer 'is replaced by" manufacturer'.
51. In newly marked Annex No 5 part In the second sentence of point 5, the words "manufacturer or importer 'are replaced by the words" applicant'.
52. In newly marked Annex No 5 part Point 6 (i) shall be deleted at the end and the following words shall be added: "and, where appropriate, in the language agreed with the manufacturer or importer of the safety component. ';
53. In the newly marked Annex No 5, Part II, point 2, the words "Manufacturer or importer 'are replaced by the words" Supplier'.
54. In the newly marked Annex No 5, Part II, point 2 (c) (6), the words "for use 'are replaced by the words" for use'.
55. In newly marked Annex 5, Part II, point 3 (3), the words "manufacturer or importer 'are replaced by the words" supplier'.
56. In the newly marked Annex No 5, Part II, point 4, first sentence, the words "type-examination 'are replaced by the words" which, in the case of products originating in the Czech Republic or in the Member States of the European Community, shall be entitled "EC type-examination certificate'," other products shall be replaced by "supplier '.
57. In the newly marked Annex No 5, Part II, point 5, the words "Manufacturer or importer 'are replaced by the words" Supplier' and the words "notify the manufacturer or importer 'are replaced by the words" inform the applicant'.
58. In the newly marked Annex 5, Part II, point 6, the dot is deleted at the end and the following words are added: "and, where appropriate, in the language agreed with the supplier of the lift by the authorised person. '
59.
60. In the newly marked Annex 6, point 1, first sentence, the words "Verification of conformity of lift with the certified type 'are replaced by the words" Final inspection' and the words "manufacturer or importer 'are replaced by the words" supplier'.
61. In the newly marked Annex 6, point 1, in the second sentence, the words "Manufacturer or importer 'are replaced by the words" Supplier', the words "Placing a Czech mark of conformity on each lift 'are replaced by the words" placing a CE mark in the cage of each lift of origin in the Czech Republic or in the Member States of the European Community' and the words "§ 4 (3) 'are replaced by the words" § 6a (1)'.
62. In newly marked Annex 6, point 2, the words "Manufacturer or importer 'are replaced by the words" Supplier'.
63. In newly marked Annex 6, point 3 (a), the words "Annex 3 'are replaced by the words" Annex 5'.
64. In newly marked Annex 6, point 4, the words "Manufacturer or importer 'are replaced by the words" Supplier' and the words "examination 'are inserted after the words" certificate'.
65. In the newly marked Annex 6, point 5, the words "leave the manufacturer or importer 'shall be replaced by" leave the supplier' and the words "provide the manufacturer or importer 'shall be replaced by the words" provide the supplier'.
66. In the newly marked Annex 6, point 6, the dot is deleted at the end and the following words are added: "and, where appropriate, in the language agreed with the supplier of the lift by the authorised person. '
67. the following Annex 7 is inserted after Annex 6, including the title:
"Annex No 7 to Government Decree No. 14 / 1999 Coll.
AUTORISATION CONDITIONS
1. The Director of the authorised person and his staff responsible for carrying out inspections and tests shall not be the designer, designer, supplier or manufacturer of safety components or supplier of lifts for which he has been inspected, nor shall the authorised representative of any of these parties. The Director of the Authorised Person and his staff responsible for assessing quality assurance systems for conformity assessment procedures pursuant to paragraphs 3 and 4 shall not be the designer, designer, supplier or manufacturer of safety components or supplier of lifts inspected by him or any authorised representative of any of these parties. The Director of the authorised person and his staff shall not be involved directly or as authorised representatives in the design, manufacture, marketing or service of security components or in the supply of lifts. This shall not preclude the possibility of exchanging technical information between the manufacturer or importer of safety components or the lift supplier and the authorised person.
2. The authorised person and his staff shall carry out inspection activities and examinations with the highest degree of professional integrity and technical competence and shall not be subject to any pressures and incentives, in particular financial ones, which may affect their decision-making or inspection results, in particular from persons or groups of persons involved in the results of the verification.
3. The authorised person must have at his disposal the necessary staff and possess the necessary equipment in order to perform properly the administrative and technical tasks associated with inspections and tests; shall also have access to the equipment required for special verification.
4. Staff responsible for inspection shall have:
(a) good technical and professional training;
(b) satisfactory knowledge of the requirements for carrying out the tests and adequate experience of such tests;
(c) the ability to draw up certificates, records and reports required to demonstrate the tests carried out.
5. The impartiality of the inspection staff shall be guaranteed. The remuneration of the staff member shall not depend on the number of tests carried out or the results of such tests.
6. Authorised person must take out legal liability insurance.
7. Staff of an authorised person shall be obliged to respect commercial secrecy with regard to all information obtained in carrying out their activities under this Regulation. ';
Annexes 5 to 11 to date shall be renumbered Annexes 8 to 14.
68. In the newly designated Annex No 8, point 1, the words "Czech conformity mark 'are replaced by the words" originating in the Czech Republic or in the Member States of the European Community', the words "Article 3 (3) 'are replaced by the words" Article 6a (1)' and the following sentence is added at the end of the paragraph: "The CE marking must be accompanied by the identification number of the authorised supervised person referred to in point 4 '.
69. In newly marked Annex No 8, point 3.1, the words "Manufacturer or importer 'are replaced by the words" Manufacturer'.
70. In the newly marked Annex No 8, point 3.3, the following sentence is inserted after the third sentence: "There shall be at least one member with experience in the assessment of lift equipment in the assessment group. '.
footnote 1 shall be renumbered footnote 6, including the footnote reference.
71. In the newly marked Annex No 8, point 3.4, fourth sentence, the words "or importers' are deleted.
72. In the newly designated Annex No 9, point 1, the words "Czech conformity mark 'are replaced by the words" originating in the Czech Republic or in the Member States of the European Community', the words "Article 3 (3) 'are replaced by the words" Article 6a (1)' and the following sentence is added at the end of the paragraph: "The CE marking must be accompanied by the identification number of the authorised supervised person referred to in point 4 '.
73. In the newly marked Annex 9, point 3.1, first sentence, the words "or importer 'are deleted.
74. In newly marked Annex 9, paragraph 3.3, the following sentence is inserted after the second sentence: "The procedure shall include an assessment at the workplace of the manufacturer of the safety component. The assessment group shall include at least one member with experience in the assessment of lift equipment. ';
footnote 2 shall be renumbered footnote 7, including the footnote reference.
75. In the newly marked Annex 9, point 3.4, fourth sentence, the words "or importers' are deleted.
76. In the newly marked Annex 9, point 5, the dot is deleted at the end and the following words are added: "and, where appropriate, in the language agreed with the manufacturer or importer of the safety component by the authorised person."
77. In the new marked Annex 10, point 1, first sentence, the words "manufacturer or importer 'are replaced by the words" supplier'.
78. In the newly marked Annex No 10, point 1, second sentence, the words "Manufacturer or importer 'are replaced by the words" Supplier of the lift', the words "places the Czech mark of conformity in the lift cage 'are replaced by the words" places the CE marking in the cage of lifts of origin in the Czech Republic or in the Member States of the European Community, the Czech mark of conformity for other lifts' and the words "§ 4 (3) 'are replaced by the words" § 6a (1)'.
79. In newly marked Annex 10, point 2, the words "Manufacturer or importer 'are replaced by the words" Supplier'.
80. In the newly marked Annex No 10, point 2 (a), the words "the place of production of the lift 'are replaced by the words" the manufacturer and the place of installation of the lift', the semicolon is replaced by the words "the importer then the manufacturer of the lift '.
81. In newly marked Annex 10, point 3 (d), the words "producer or importer 'are replaced by the words" supplier'.
82. In the newly marked Annex No 10, point 4, after the words "this Regulation, the authorised person ', the words" attach or have his identification number attached in accordance with Annex 3 and according to the tests carried out' shall be deleted and the words "the supplier 'shall be deleted and the words" propose a remedy', the words "certified type 'shall be deleted and the words" the manufacturer or importer' shall be replaced by the words "the supplier '.
83. In the newly marked Annex No 10, point 5, at the end, the dot is deleted and the following words are added: "or in a language agreed with the supplier of the lift by the authorised person. '
84. In the title of newly marked Annex No 11, the words "WITH REVIEW OF TYPE 'shall be inserted after the word" COMPETENTS'.
85. In the newly marked Annex 11, point 1, first sentence, the words "with a tested type 'shall be inserted after the words" components'.
86. In the newly marked Annex 11, point 1, second sentence, the words "Paragraph 3 (3) 'are replaced by the words" Paragraph 6a (1)' and the words "Place the Czech mark of conformity 'shall be replaced by the words" originating in the Czech Republic or in the Member States of the European Community'.
87. In newly marked Annex 11, point 2, the words "or importer 'are deleted.
88. In the newly marked Annex 11, point 3, third sentence, the words "certified type 'shall be inserted after the words" not identical' and the following sentence shall be added at the end: "The manufacturer shall indicate the safety components by the identification number of the authorised person already during the production process. '.
89. In the newly marked Annex 11, point 4, the dot is deleted at the end and the following words are added: "or in a language agreed by the authorised person with the manufacturer or importer of the safety components."
90. In the newly marked Annex No 12, paragraph 1, first sentence, the word "manufacturer 'is replaced by the word" supplier'.
91. In the newly designated Annex No 12, point 1, second sentence, the word "Manufacturer 'is replaced by the word" Supplier', the words "Czech conformity mark 'are replaced by the words" originating in the Czech Republic or in the Member States of the European Community', the words "Article 3 (3) 'are replaced by the words" Section 6a (1)' and the following sentence is added at the end: "The CE marking must be accompanied by the identification number of the authorised person supervising in accordance with point 4 '.
92. In newly marked Annex 12, point 2, the word "Manufacturer 'is replaced by" Supplier'.
93. In newly marked Annex 12, point 3.1, the words "Manufacturer or importer 'are replaced by the words" Supplier'.
94. In the newly marked Annex No 12, point 3.1 (a), the semicolon is replaced by a comma, and the words "the importer then details of the lift manufacturer 'are deleted.
95. In newly marked Annex 12, point 3.2 (c), the figure "4 'is replaced by" 6'.
96. In the newly marked Annex No 12, point 3.3, the word "manufacturer 'is replaced by the word" supplier', the following sentence is inserted after the third sentence: "There must be at least one member in the assessment group with experience in the assessment of lift equipment 'and the words" lift manufacturers' shall be replaced by the words "lift supplier '.
footnote 3 shall be renumbered footnote 8, including the footnote reference.
97. In the newly marked Annex No 12, point 3.4, "Manufacturer 'is replaced by" Supplier', "Manufacturer or importer 'is replaced by" Supplier' and "Notifies the manufacturer or importer 'is replaced by" Notifies the supplier'.
98. In newly marked Annex 12, point 4.1, the word "manufacturer 'is replaced by" supplier'.
99. In newly marked Annex 12, point 4.2, the word "manufacturer 'is replaced by the word" supplier'.
100. In newly marked Annex 12, point 4.3, the word "manufacturer 'is replaced by" supplier' and the word "manufacturer 'is replaced by the word" supplier'.
101. In newly marked Annex 12, point 4.4, the word "manufacturers' is replaced by the word" suppliers'.
102. In the newly marked Annex No 13, first sentence, the word "manufacturer 'is replaced by the word" supplier'.
103. In the newly designated Annex No 13, point 1, second sentence, the words "Manufacturer or importer 'shall be replaced by the words" Supplier', the words "Paragraph 3 (3) 'shall be replaced by the words" Paragraph 6a (1)', the words "Czech conformity mark 'shall be replaced by the words" originating in the Czech Republic or in the Member States of the European Community, the CE marking shall be replaced by the following words: "CE marking must be accompanied by the identification number of the authorised person supervising in accordance with point 4'.
104. In newly marked Annex 13, point 2, "Manufacturer 'is replaced by" Supplier'.
105. In the newly marked Annex No 13, point 3.1, "Manufacturer or importer 'is replaced by" Supplier'.
106. In the newly marked Annex No 13, point 3.1 (a), the semicolon is replaced by a comma, and the words "the importer then details of the lift manufacturer 'are deleted.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Government Decree No. 288 / 2000 Coll., amending Government Decree No. 14 / 1999 Coll., laying down technical requirements for lifts, as amended by Government Decree No. 227 / 1999 Coll. |
|---|---|
| Regulation Type | Regulation |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 29.08.2000 |
|---|---|
| Effective from | 02.07.2001 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0